Disclaimer and legal notice
What you should know before connecting a camera to lilocam: who we are and are not, trademark ownership, how the camera link was made, what writing to a camera can and cannot promise, and where the responsibility lies.
Effective 21 September 2026 · Version 1.0
The short version
- lilocam is an independent app. It is not affiliated with, endorsed by, or sponsored by FUJIFILM Corporation or any other camera manufacturer.
- Every film recipe is our own handcrafted approximation, made from our own reference photography. Results are close, not identical.
- Writing recipes to a camera is currently beta software. It writes only the seven custom slots, the same as the manufacturer's own app — but we cannot guarantee it, and neither can they. Back up your camera's settings first.
- If your camera locks up: battery out, five seconds, battery in.
1. Trademarks and affiliation
lilocam is made by Koua Lo, dba Daisycloud or Daisycloud Software (“we”, “us”). lilocam is not affiliated with, endorsed by, or sponsored by FUJIFILM Corporation or any other camera manufacturer.
FUJIFILM, X-Trans, RAF and the names of its film simulations are trademarks of FUJIFILM Corporation. iPhone and ProRAW are trademarks of Apple Inc. Any other camera brand names or trademarks referenced on this site are the property of their respective owners. They are used here only to describe compatibility and the look a recipe approximates.
Nothing bearing the FUJIFILM name or marks appears in lilocam's interface until a camera manufactured by FUJIFILM Corporation is connected to it, and only for as long as it is. During a connection the app displays the model name and identity that the connected camera itself reports, solely to identify that device to its owner. lilocam's own film looks are named by lilocam (Standard, Vintachrome, Lilonoir, Fidelity, and so on); the manufacturer's film simulation names are not used as the names of lilocam's looks. On this site, the manufacturer's name and marks appear only in this notice, in the manual's description of which cameras and files lilocam works with, and in the maker's own letter — in each case only to describe compatibility or to tell the story of how lilocam came to be. The same applies to any other manufacturer whose camera may be supported in future.
2. The film recipes
All film recipes in lilocam are original, handcrafted approximations developed by our team using our own reference photography. They are not derived from any manufacturer's proprietary source code, firmware, or colour profiles. Because a phone's sensor and a camera's sensor differ, results may vary and are not guaranteed to be identical to any camera's output.
3. The camera link
lilocam's camera link is built entirely on open, industry-standard protocols and on the operating system's own frameworks, and was developed independently by Daisycloud. Over Bluetooth it uses Bluetooth Low Energy (the GATT profile) through the phone's Bluetooth framework. Over USB it uses the Picture Transfer Protocol (PTP, ISO 15740) through the phone's image-capture framework. Over Wi-Fi it joins the camera's own access point with the phone's network frameworks and exchanges PTP operations over TCP/IP. lilocam contains no manufacturer SDK, library, or code, and no third-party or proprietary networking library; how the camera responds to these standard protocols was established by observation and testing on our own equipment. A future firmware or app update from the manufacturer may change how the camera responds, and lilocam's link may stop working until lilocam is updated; that is not a defect in your camera.
lilocam only connects to the camera bodies it has been tested with. Other bodies and other makes are refused, with a message saying so.
4. Writing to your camera is beta software
Writing recipes to your camera is currently beta software. We have not bricked a camera in any of our testing, in almost a year of development, but we cannot guarantee it — even the manufacturers themselves cannot offer such a guarantee.
lilocam writes only to the seven custom recipe slots (C1–C7), the same slots the manufacturer's own app writes, so the risk is comparable. It never touches firmware, and it never writes anything the camera has not first handed over.
- Before your first write, back up your camera's settings with the camera's own menu (SETUP → SAVE/LOAD SETUP → BACKUP), so the state you started from is on the card.
- While a write is in progress, do not switch the camera off, pull the cable, or leave the app. A write takes a few seconds and the app says when it is done.
5. Warranty and liability
lilocam is provided as is, without warranty of any kind, express or implied. To the fullest extent permitted by law, Daisycloud Software is not responsible for damage to your camera, your phone, or your files; for loss of photographs, recipes, or camera settings; or for any warranty voided by the use of third-party software with your camera.
Using the camera link is your decision. If that risk is not acceptable to you, do not connect a camera — every other part of lilocam works without one.
6. Your data
lilocam collects no data. Photographs, recipes, location tags and the camera's profile stay on your phone. See the privacy policy.
7. Contact
Questions about this notice: Support.